Product Description

Main features:
 • Automatic core loading and replacing. The logs are automatically pushed out after finishing winding, and then start winding again. The cores can be adjusted to any size of cores within one minute.
 • After finished winding the roller pushed out automatically. It’s adopt machanism arm pusher to push the roller out. The minimum diameter of finished roll is *0mm.
 • Automatic trimming, gluing and sealing: it has replaced the traditional sealing of rolls with the international popular trimming and sealing, which can have ****8mm tails to facilitate to start pulling out the paper. At the same time, it can greatly cut down the wastage of the paper, thus to cut down the production cost.
 • Advanced PLC programmable control technology: the winding profiles can be tight at the beginning of winding, and then getting loose, to avoid the problems that the cores are loose from the rolls after long time storage.
Automatic detection of paper break and paper wrap up: to guarantee the high quality of the finished rolls even in the high speed operation.
 • Coreless rewinding system has changed the traditional mathod to take out the core to make with quality solid coreless roller. Reducing the manpower.
 • With high precision screwy perforation knife. With 4 perforation blades to make clear perforating. The perforating pitch controlled by gear box.
 • Three backstands, pneumatic jumbo roll loading, and pneumatically wide belt paper unwinding driving, and individual web tension control unit for each jumbo roll.
Point to point embossing unit: the paper are embossed on both sides and feel softer. It make embossing more clearer and better.  • The finished rolls compared to the same diameter rolls with less paper.
 • The web can be threaded on the machine by the two jog s. It’s more safety and easier to feed the web.
Main Technical Parameter
• Finished Roll Diameter：Φ*0~**0 mm (Degree of tightness adjustable)
• Finished Roll Core Diameter：Φ *0～*0 mm
• Raw Material Diameter：≤Φ ***0 mm (Other sizes are available )
• Raw Material Core Diameter：3”(*6.2 mm) (Other sizes are available )
• Perforating Pitch ：*0~**0mm (Pneumatically separating unit-Optional)
• Speed：******0 meters/min
• Parameter Setting：Touch LCD Screen operation panel
• Programme Controller ：MITSUBSHI Programmable Controller (PLC)
• Mechanism Driving：Stepless gear box, insure the precision of
                                          finished product length
• Embossing Roller：Two sets of Steel to rubber
• Unwinding Paper Stand ：3 ply
• Pneumatic System 3 HP air compressor, mini pressure 
   5kg/cm2 Pa(Provided by client)
• Power：Variable frequency speed control, 7.5KW
• Machine Size ：***0×***0×***0mm(L×W×H)
• Weight：***0kg
  Main Technical Parameter
• Log length: ***0mm~***0mm
• Log outside diameter: *0mm~**0mm (standard size: **0±5mm)
• Cutting length: variable
• Machine speed: **0cuts/min, 2 rolls /cut
• Operation speed: **0cuts/min, 2 rolls /cut
• Blade outside diameter: **0mm
• Installed power: Alternating Current: 5 Horses per Machine
• Frequency Conversion: 5 Horses per Machine
• Alternating Current: 1/2 Horses per Machine, AC motor 5 Horses